EXPLORE MORE CATEGORIES
- Home
- ยป
- Products & Services
- »
- Tile Adhesive
Tile Adhesive
Providing you the best range of myk laticrete 340 medium bed adhesive grey, myk laticrete 335 floor and wall tile adhesive, myk laticrete 320 thick bed adhesive grey, akemi darkener super, tile spacer 2 mm and mapei mapeplast super with effective & timely delivery.
Myk Laticrete 340 Medium Bed Adhesive Grey
Product Price: Rs 2,150 / BagGet Best Price
Product Brochure
Product Details:
| Packaging Size | 25 Kg |
| Model Number | Laticrete 340 |
| Packaging Type | Bag |
| Surface Of Application | Plastic, Metal, Steel |
| Grade Standard | Industrial |
| Strength | High |
| Material Compatibility | Plastic |
| Chemical Resistance | Acids |
| Country of Origin | Made in India |
- Suitable for stone installations on interior & exterior wall
- Can be used upto 15 mm thickness
- Complies to C2TES1 as per EN 12004/ISO 13007 and ANSI A 118.4 ET
- Non Shrink & No lippage
Coverage Approx. 33-38 Sft per 30kg bag with 1/2” x 1/2” (12mm x 12mm) square notched trowel for average bed of 6mm. Coverage will vary depending on trowel notch size, type and size of tile and substrate smoothness and evenness. Color Grey & White Certification
- ANSI: A 118.4 ET
- EN 12004/ISO 13007
Surface Preparation:
All Surfaces Should Be Between 40° F(4°c) and 104° F(40°c) and Structurally Sound, Clean and Free of All Dirt, Oil, Grease, Loose Peeling Paint, Laitance, Concrete Sealers or Curing Compounds.
Check the Surface to Be True to Plumb. All Slabs Must Be Plumb and True to Within ¼” (6mm) in 10 Ft (3m). Rough or Uneven Concrete Surfaces Should Be Made Smooth With Laticrete® Screed/plaster Material to Provide a Wood Float (or Better) Finish.
Installation Shall Be Made on a Dry Surface. New Concrete Slabs Must Be Damp Cured and at Least 28 Days Old Prior to Application. All Slabs Must Be Plumb and True to Within 1/4” (6mm) in 10ft (3m). Expansion Joints Shall Be Provided Through the Tile Work From All Construction or Expansion Joints in the Substrate
Dry, Dusty Concrete Slabs or Masonry Should Be Dampened, and Excess Water Swept Off. Installation May Be Made on a Damp Surface. New Concrete Slabs Shall Be Damp Cured and 28* Days Old Before Application.*no Minimum Cure Time for Concrete Slabs When Thin-set Mortar is Mixed With Latex Additive.
Expansion Joints Shall Be Provided Through the Tile Work From All Construction or Expansion Joints in the Substrate. Do Not Cover Expansion Joints With Thin Set Mortar. Follow Ansi Specification an-3.8 “requirements for Expansion Joints” or Tca Detail Ej171 “expansion Joints”. For Tile Installation Over Cement Backer Board: Follow Tca Installation Details W244.
Mixing: Place Clean, Potable Water Into a Clean Mixing Bowl. Add Laticrete® 340 Powder Into the Mixing Bowl. Use Approximately 8.5 – 9 L of Water for 30 Kg of Powder. Mix by Hand or With a Slow Speed Mixer to a Smooth, Trowelable Consistency. Allow Adhesive to Slake for 5-10 Minutes. Adjust Consistency if Necessary. Remix and Apply With the Proper Sized Notched Trowel. Note: Addition of Myk Laticrete® Latex Admix*, Partially or Completely Replacing Water Would Enhance the Bond Strength, Flexibility of the Medium Bed Mortar. Application:
Natural Stone Installation:apply Adhesive to the Substrate With the Flat Side of the Trowel, Pressing Firmly to Work Into Surface. Comb on Additional Adhesive With the Notched Side. Use the Proper Sized Notched Trowel to Ensure Full Bedding of the Stone. Spread as Much Adhesive as Can Be Covered With Stone in 10 Minutes. Back Butter Large Format Stones (> 12”x12”) to Provide Full Bedding and Firm Support. Place Stones Into Wet, Sticky Adhesive and Beat in Using a Beating Block and Rubber Mallet to Imbed Stone and Adjust Level. Check Adhesive for Complete Coverage by Periodically Removing a Stone and Inspecting Bedding Adhesive Transfer Onto Back of Stone. Use of Myk Laticrete Spacers is Recommended to Provide Grout Joints Between Stones. The Joint Width Shall Be as Per the Recommendation of Architect / Engineer. Remove the Spacers When the Adhesive is Set Firm.
If Adhesive is Skinned Over (Not Sticky), Remove and Replace With Fresh Adhesive.
Yes! I am InterestedRequest A Callback
Myk Laticrete 335 Floor And Wall Tile Adhesive
Product Price: Rs 925 / BagGet Best Price
Product Brochure
Product Details:
| Packaging Size | 20 Kg |
| Model Number | Laticrete 335 |
| Packaging Type | Bag |
| Surface Of Application | Plastic |
| Grade Standard | Industrial |
| Strength | High |
| Material Compatibility | Plastic |
| Chemical Resistance | Acids |
| Country of Origin | Made in India |
The multipurpose high polymer, flexible modified thin-set mortar for interior and exterior installation of ceramic tiles, stone, quarry tiles, glass mosaic tiles, pavers and brick. LATICRETE® 335 Super Flex Multipurpose Floor & Wall Tile Adhesive is designed to mix with water, has a convenient open time with high adhesion and workability.
Features & Benefits
- For fixing tiles & stone on demanding external & internal applications
- Polymer modified super flexible adhesive with superior bond strength
- High performance in all types of weather
- Single component - Just add water
- ANSI: A 118.4ET
- EN12004/ISO 13007 : C2TES1
- IS 15477:2019: TYPE 3 TS1 ADHESIVE
- VOC: Practically Nil
- If a plaster/leveling mortar bed is applied, ensure that it is cured for at least 7 days to achieve proper strength before application of tile adhesive for installation of tile
- Ensure the substrate is clean and free from impurities like dust, dirt, debris, oil, grease, curing agents, loose plaster etc
- Dampen the wall before application of thin set adhesive
- Clean the back of tile for any dust or coating
- Wet the surface and remove the excess water before applying the adhesive. Ensure the area is shaded from sunlight. The adhesive shall be applied with the flat side of the trowel using a scraping motion to work the material into good contact with the surface to be covered.
- Additional mortar is then applied with the notched edge of the trowel.
- When installing large tiles, spread adhesive onto back of tile in addition to trowelling material over surface to be tiled. Select proper type of notched trowel.
a) Thin Tiles upto size 300 X 300 mm (1’X1’), use a square notched trowel of size 6mm X 6mm to provide a total thickness of 3mm
b) Large Porcelain Tiles upto 450 X 450 mm with ribs, use a square notched trowel of size 6mm X 6mm and back butter the tiles with the same adhesive to a thickness of 1-1.5mm to provide a total thickness of 4.5mm
c) Large Porcelain Tiles upto 600 X 600 mm (2’X2’) with ribs, use a square notched trowel of size 6mm X 9mm and back butter the tiles with the same adhesive to a thickness of 1-1.5mm to provide a total thickness of 6mm
- The most important standard to keep in mind is to insure that the piece of tile is completely bedded in the mortar or adhesive with 100% coverage.
- Rear face of tiles (especially Porcelain tiles) should be cleaned with damp sponge to clean all the dust. Do not saturate in water.
Yes! I am InterestedRequest A Callback
Myk Laticrete 320 Thick Bed Adhesive Grey
Product Price: Rs 1,560 / BagGet Best Price
Product Brochure
Product Details:
| Packaging Size | 50 Kg |
| Model Number | Laticrete 320 |
| Packaging Type | Bag |
| Surface Of Application | Metal, Plastic, Steel |
| Grade Standard | Industrial |
| Strength | High |
| Material Compatibility | Plastic |
| Chemical Resistance | Acids |
| Country of Origin | Made in India |
Features & Benefits
- Suitable for interior & exterior floor application
- Can be used upto 40 mm thick-bed
- High Bond Strength
- Supports heavy Stones / Slabs Non Shrink & No lippage
Coverage Approx. 33-38 Sft per 30kg bag with 1/2” x 1/2” (12mm x 12mm) square notched trowel for average bed of 6mm. Color Grey & White Certification
- ANSI: A 118.4
- EN: 12004
- IS: 15477
- Concrete, Tremix concrete, VDF concrete
- Precast concrete
- Cement based screed
- Gypsum based screed
- Ceramic tile, Vitrified Tile and Natural Stone
- Cement Backer Board**
- Cement Terrazzo
- Existing natural stone or tile surface
Yes! I am InterestedRequest A Callback
Akemi Darkener Super
Product Price: Rs 4,600 / LitreGet Best Price
Product Details:
| Chemical Name | Darkener Super |
| Packaging Size | 20kg |
| Form | Liquid |
| Packaging Type | Container |
| Country of Origin | Made in India |
Yes! I am InterestedRequest A Callback
Tile Spacer 2 Mm
Product Price: Rs 70 / PackGet Best Price
Product Details:
| Spacer Size | 2 mm |
| Material | Plastic |
| Shape | Cross |
| Usage Area | Floor Tile |
| Color | White |
| Size | 2 mm |
| Usage/Application | tile laying |
| Finish | Plain |
| Country of Origin | Made in India |
Yes! I am InterestedRequest A Callback
Mapei Mapeplast Super
Product Price: Rs 4,500 / PieceGet Best Price
Product Details:
| Packaging Size | 20 kg |
| Packaging Type | HDPE Barrel |
| Surface Of Application | Plastic |
| Grade Standard | Industrial |
| Strength | High |
| Material Compatibility | Plastic |
| Chemical Resistance | Acids |
Yes! I am InterestedRequest A Callback
Mapei mapeplast super
Product Price: Rs 4,500 / PieceGet Best Price
Product Details:
| Packaging Size | 20 kg |
| Packaging Type | HDPE Barrel |
| Surface Of Application | Plastic |
| Grade Standard | Industrial |
| Strength | High |
| Material Compatibility | Plastic |
| Chemical Resistance | Acids |
| Country of Origin | Made in India |
Yes! I am InterestedRequest A Callback
Kerakoll H40 Grey Tiles And Stone Adhesives 25 Kg
Product Price: Rs 1,480 / BagGet Best Price
Product Details:
| Country of Origin | Made in India |
| Packaging Size | 5 kg |
Yes! I am InterestedRequest A Callback